China manufacturer High Speed Planetary Gearbox/Reducer, Industrial Planetary Gearbox gearbox and motor

Product Description

Product Description

ZHangZhoug New CHINAMFG Hydraulic Co., Ltd. is a professional manufacturer of planetary reducers/gearbox. At present,we developed tens of thousands specifications of the planetary reducer/gearbox, travel drive,swing drive and winch drive.The ratio range is 3.3~9000, and the output torque range is 500~1200000N.m. The installation, dimensions and performance parameters of the reducer are exactly the same as famous European brands, which can be perfectly replaced and interchanged.

Details as follows:
BONFIGLIOLI (300 series, 700C series, 700T series, 600W series)
BREVINI (EM, ED, ET, EQ, EC, PD, PDA, CTD, CTU, SL types)
DINAMIC OIL (types RE, GB, RA, GBA)
REGGIANA RIDUTTORI (RR, RA type)
COMER (PG, PGA, PGR, PGW types)
REXROTH (GFT, GFT-W, GFB type)
ROSSI (R2E, R3E, R4E, RCE, RC2E, RC3E, MR2E, MR3E, MR4E, MRCE, MRC2E, MRC3E)
ZOLLERN (ZHP3.13, ZHP3.15, ZHP3.19, ZHP3.20, ZHP3.22, ZHP3.24, ZHP3.25, ZHP3.26, ZHP3.27, ZHP3.29, ZHP3.31, ZHP3.32)
FAIRFIELD, AUBURN GEAR, OMNI GEAR, O&K, etc. Therefore,our planetary reducer/gearbox can be used to replace the gearboxes of these brands.

Bonfiglioli Dinamic oil Brevini RR
300 RE110 EM1571 ED1571 ET2571 RR65/105
301 RE210 EM1030 ED1030 ET2030 RR110/210
303 RE240 ED2030 ET3030 EQ4030 RR310
304 RE310 ED2040 ET3040 EQ4040 RR510
305 RE510 EM1045 ED2045 ET3045 RR510/710
306 RE810 EM1046 ED2046 ET3046 RR810
EM1065 ED2065 ET3065
307 RE1571 EM1090 ED2090 ET3090 RR1571
RE1520
309 RE1520 ED2150 ET3150 EQ4150 RR1700
310 RE2520 ED2250 ET3250 EQ4250 RR2700
ED2320 ET3320 EQ4320
311 RE3510 SL3001,SL3002,SL3003,SL3004 RR4000
313 RE3511,RE3512,RE3513,RE3514 SL4001,SL4002,SL4003,SL4004 RR5000/RR5200
315 RE6520 SL6001,SL6002,SL6003,SL6004   SL8501,SL8502,SL8503 RR6500
316 GB11000 SL12001,SL12002,SL12003,SL12004 RR8000
317 GB18000,GB21000, SL18001,SL18002,SL18003 RR10000
318 GB26000 SL25001,SL25002,SL25003,SL25004    RR15000
319 GB53000,GB53000 SL35001,SL35002,SL35003,SL35004    RR20000
320      
321 GB61000    

 

300 Series Planetary Geabox Parameter

 

  Model    

    Rated Output Torque  

(N.m)

Max.Power

(KW)

Max.Input Speed

(rpm)

Ratio
   
301 1750 30 3000 3.4-2700 7-700
303 2500 40 3000 3.6-2800 9-800
305 5000 60 3000 3.6-2800 9-800
306 8500 75 2500 3.6-2900 9-800
307 12500 100 2500 3.4-2400 13-700
309 18500 130

2500

3.4-2400 13-700
310 25000 150 2000 4-2500 40-900
311 35000 180 2000 4-2100 18-800
313 50000 200 2000 4-2200 18-800
315 80000 250 1500 4-1800 70-900
316 105000 270 1500 4.4-1200 50-600
317 150000 300 1000 4-1900 70-900
318 200000 340 1000 4.4-1100 200-700
319 30000 380 500 4.8-1400 300-800

Office Environment

Our Equipment
Accessories for 300 Series

Certificate

Contact Us

How to contact us?
  Nancy Zhang

Foreign Sales&Marketing Manager
HangZhou Kemer Engineering Machinery Co.,LTD
  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Marine, Agricultural Machinery
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
After Warranty Service: Video Technical Support, Online Support
Customization:
Available

|

Customized Request

speed reducer gearbox

Ensuring Precision of Gear Tooth Profiles in Speed Reducer Gearboxes

Manufacturers employ several techniques to ensure the precision of gear tooth profiles in speed reducer gearboxes, which is crucial for optimal performance and longevity:

  • High-Quality Materials: Manufacturers use high-quality materials for gear manufacturing, such as hardened steel or specialized alloys, to enhance durability and minimize wear.
  • Precision Machining: Advanced machining processes, including CNC (Computer Numerical Control) machining and grinding, ensure accurate tooth profiles and precise gear dimensions.
  • Tooth Profile Design: Detailed tooth profile designs based on mathematical calculations and engineering principles help optimize meshing and minimize stress concentration.
  • Tooth Forming Techniques: Various tooth forming methods, such as hobbing, shaping, and broaching, are employed to create accurate gear tooth profiles with minimal deviations.
  • Heat Treatment: Heat treatment processes like carburizing, quenching, and tempering are used to achieve the desired hardness and strength, ensuring gear teeth can withstand operational stresses.
  • Quality Control: Rigorous quality control measures, including inspection using precision tools like coordinate measuring machines (CMMs), ensure compliance with design specifications.
  • Lubrication and Surface Coatings: Proper lubrication and specialized surface coatings help reduce friction and wear, maintaining accurate tooth profiles during operation.

By implementing these techniques and adhering to stringent quality standards, manufacturers can achieve the required precision in gear tooth profiles, resulting in smooth and efficient operation of speed reducer gearboxes.

speed reducer gearbox

Factors to Consider When Selecting the Right Speed Reducer Gearbox

Choosing the appropriate speed reducer gearbox for an application involves considering several key factors to ensure optimal performance and efficiency. Here are the factors to take into account:

Torque and Speed Requirements: Determine the required torque output and speed reduction or increase for your specific application. Select a gearbox that can handle the desired torque and provide the necessary speed output.

Ratio: The gear ratio determines the relationship between input and output speeds. Choose a gearbox with the appropriate gear ratio to achieve the desired speed reduction or increase.

Efficiency: Consider the efficiency of the gearbox, as higher efficiency results in less energy loss and heat generation. Choose a gearbox with a high efficiency rating for improved energy savings.

Load Type: Identify whether the application involves constant, intermittent, or shock loads. Different gearbox designs are better suited for specific load types.

Space and Mounting Constraints: Evaluate the available space for installing the gearbox and ensure that the selected design fits within the allotted area. Consider mounting options and alignment requirements.

Environmental Conditions: Take into account factors such as temperature, humidity, dust, and corrosive environments. Choose a gearbox with appropriate sealing and protection to withstand the operating conditions.

Service Life and Maintenance: Consider the expected service life of the gearbox and its maintenance requirements. Select a gearbox with durable components and minimal maintenance needs.

Backlash: Backlash refers to the amount of play or clearance between gear teeth. Depending on the application’s precision requirements, choose a gearbox with low backlash for accurate motion control.

Noise and Vibration: Some applications require low noise and vibration levels. Choose a gearbox with features to minimize noise and vibration if necessary.

Cost: Factor in the cost of the gearbox and its long-term operational expenses. Balance the initial investment with the expected benefits and performance improvements.

Compatibility: Ensure that the gearbox is compatible with the existing components and systems in your application.

Manufacturer and Supplier: Choose a reputable manufacturer or supplier with a track record of delivering high-quality, reliable gearboxes.

By carefully considering these factors, you can select the right speed reducer gearbox that meets the specific requirements of your application, ensuring efficient and reliable operation.

speed reducer gearbox

What Advantages Does a Speed Reducer Gearbox Offer in Industrial Applications?

A speed reducer gearbox provides numerous advantages that make it a valuable component in a wide range of industrial applications. These advantages contribute to improved efficiency, performance, and reliability of machinery and equipment.

1. Speed Reduction: One of the primary benefits of a speed reducer gearbox is its ability to reduce the rotational speed of an input shaft, which is often provided by a high-speed power source such as an electric motor. This speed reduction is crucial in applications where the output speed needs to be lower than the input speed to achieve optimal performance. For example, in manufacturing processes or conveyor systems, a slower output speed is often necessary for precise control and safe handling of materials.

2. Torque Increase: The gear arrangement within a speed reducer gearbox leads to an increase in torque at the output shaft compared to the input shaft. This torque amplification is essential for applications that require higher levels of force to overcome resistance, move heavy loads, or perform work. The gearbox’s ability to multiply torque ensures that machinery can handle demanding tasks effectively.

3. Mechanical Advantage: Speed reducer gearboxes utilize gear trains and ratios to create a mechanical advantage. This advantage allows the gearbox to convert high-speed, low-torque input power into low-speed, high-torque output power. The mechanical advantage enhances the efficiency of power transmission and motion control, making it well-suited for applications that involve both speed reduction and torque increase.

4. Versatility: Speed reducer gearboxes are highly versatile and can be tailored to specific application requirements. Manufacturers offer a variety of gear ratios, sizes, and configurations, allowing for customization to achieve the desired output characteristics. This adaptability ensures that gearboxes can be integrated into a wide range of machinery and equipment across different industries.

5. Smooth Operation: The precise meshing of gears in a speed reducer gearbox results in smooth and consistent power transmission. This characteristic is crucial for applications that demand accurate and controlled movement, such as robotics and automated systems. The gearbox’s ability to maintain steady motion contributes to the overall efficiency and performance of the system.

6. Energy Efficiency: By converting high-speed, low-torque input power into a lower-speed, higher-torque output, speed reducer gearboxes help optimize energy usage. This energy-efficient operation can lead to reduced power consumption, lower operating costs, and improved sustainability in industrial processes.

7. Noise and Vibration Reduction: The gear arrangement in a speed reducer gearbox can help dampen noise and vibrations produced by the power source. This is particularly beneficial in applications where noise reduction is essential for a comfortable working environment or to prevent damage to sensitive equipment.

In summary, a speed reducer gearbox offers advantages such as speed reduction, torque amplification, mechanical advantage, versatility, smooth operation, energy efficiency, and noise reduction. These benefits make speed reducer gearboxes indispensable components in various industrial settings, enhancing the overall performance and productivity of machinery and systems.

China manufacturer High Speed Planetary Gearbox/Reducer, Industrial Planetary Gearbox   gearbox and motor	China manufacturer High Speed Planetary Gearbox/Reducer, Industrial Planetary Gearbox   gearbox and motor
editor by CX 2024-02-23