Product Description
R Series Helical Gear Electric Motor Speed Reducer with 220V geared motor
Product Description
R Series reducers are designed and manufactured on the basis of modular combination system.
There are a lot of motor combinations, installation forms and structural schemes. The transmission
ratio is classified and fine to meet different operating conditions, and the performance is superior.
Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface
is carburized, quenched and hardened, and the gear is finely ground. It has stable transmission, low
noise, and large bearing capacity. Low temperature rise, long service life. It is widely used in metallurgy,
1. Features: small offset output, compact structure, maximum use of box space, use of integral casting box, good stiffness, can improve the strength of the shaft and bearing life.
2. Installation type and output mode: bottom seated type and large and small flange type installation, CHINAMFG shaft output.
3. Input mode: direct motor, shaft input and connecting flange input.
4. Reduction ratio: secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125.
5. Average efficiency: Class II 96%, Class III 94%, R/R combination 85%.
6. The R series specially designed for mixing can bear large axial and radial forces.
Technical parameters:
Coaxial coaxial output
R reducer
Power: 0.12KW~160KW
Torque: 1.4N · m ~ 23200N · m
Output speed: 0.06 ~ 1090r/min
Model example:
R17-Y4-4P-32.40-M1-0°
R: Series code
F: Shaft extension flange installation
17: Machine model
Y: Three phase AC asynchronous motor
4: Motor power
4P: motor stage
32.40: Transmission ratio
M1: Installation type
0 °: junction box position (0 ° – 270 °)
R series helical gear hardened gear reducer
Basic model of R series reducer:
R17R27R37R47R57R67R77R87R97R107R137R147R167
RF17RF27RF37RF47RF57RF67RF77RF87RF97RF107RF137RF147RF167
RX37RX57RX67RX77RX87RX97RX107RX127RX157
RXF37RXF57RXF67RXF77RXF87RXF97RXF107RXF127RXF157
R series helical gear reducer with hard tooth surface features small size, light weight, high bearing capacity, high efficiency, long service life, convenient installation, wide motor power range, fine transmission ratio classification, etc. It can be widely used in equipment that needs to be decelerated in various industries.
sewage treatment, chemical industry, pharmacy and other industries.
Company Profile
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 430/Piece
1 Piece(Min.Order) | |
|---|
Customization of Speed Reducer Gearboxes for Specific Industrial Needs
Yes, speed reducer gearboxes can be customized to meet specific industrial requirements. Manufacturers offer various customization options to ensure that the gearboxes align with the unique needs of different applications:
- Design Flexibility: Manufacturers can modify the design of speed reducer gearboxes to accommodate specific space constraints, mounting arrangements, and input-output shaft configurations.
- Gear Ratio Selection: Custom gear ratios can be selected to optimize the speed reduction or increase for a particular application, allowing for tailored torque and speed requirements.
- Material Selection: Gearbox components can be crafted from different materials based on factors such as corrosion resistance, temperature tolerance, and load-bearing capacity.
- Sealing and Protection: Customized sealing solutions, such as IP-rated enclosures and specialized gaskets, can be integrated to enhance protection against dust, moisture, and harsh environments.
- Lubrication Systems: Gearboxes can be equipped with specialized lubrication systems to ensure consistent and efficient lubrication in specific operating conditions.
- Accessories and Attachments: Manufacturers can add accessories like external cooling fans, temperature sensors, and mounting flanges to enhance gearbox performance and monitoring.
- Compliance with Standards: Customized gearboxes can be designed to meet industry-specific standards, certifications, and safety requirements.
By collaborating with manufacturers and providing detailed specifications, industries can obtain speed reducer gearboxes that are tailor-made to their specific needs, ensuring optimal performance and reliability in their applications.
Factors to Consider When Selecting the Right Speed Reducer Gearbox
Choosing the appropriate speed reducer gearbox for an application involves considering several key factors to ensure optimal performance and efficiency. Here are the factors to take into account:
Torque and Speed Requirements: Determine the required torque output and speed reduction or increase for your specific application. Select a gearbox that can handle the desired torque and provide the necessary speed output.
Ratio: The gear ratio determines the relationship between input and output speeds. Choose a gearbox with the appropriate gear ratio to achieve the desired speed reduction or increase.
Efficiency: Consider the efficiency of the gearbox, as higher efficiency results in less energy loss and heat generation. Choose a gearbox with a high efficiency rating for improved energy savings.
Load Type: Identify whether the application involves constant, intermittent, or shock loads. Different gearbox designs are better suited for specific load types.
Space and Mounting Constraints: Evaluate the available space for installing the gearbox and ensure that the selected design fits within the allotted area. Consider mounting options and alignment requirements.
Environmental Conditions: Take into account factors such as temperature, humidity, dust, and corrosive environments. Choose a gearbox with appropriate sealing and protection to withstand the operating conditions.
Service Life and Maintenance: Consider the expected service life of the gearbox and its maintenance requirements. Select a gearbox with durable components and minimal maintenance needs.
Backlash: Backlash refers to the amount of play or clearance between gear teeth. Depending on the application’s precision requirements, choose a gearbox with low backlash for accurate motion control.
Noise and Vibration: Some applications require low noise and vibration levels. Choose a gearbox with features to minimize noise and vibration if necessary.
Cost: Factor in the cost of the gearbox and its long-term operational expenses. Balance the initial investment with the expected benefits and performance improvements.
Compatibility: Ensure that the gearbox is compatible with the existing components and systems in your application.
Manufacturer and Supplier: Choose a reputable manufacturer or supplier with a track record of delivering high-quality, reliable gearboxes.
By carefully considering these factors, you can select the right speed reducer gearbox that meets the specific requirements of your application, ensuring efficient and reliable operation.
Industries and Machinery Using Speed Reducer Gearboxes
Speed reducer gearboxes find extensive use in various industries and machinery where precise speed reduction and torque amplification are essential for optimal performance. Some of the industries and machinery commonly utilizing speed reducer gearboxes include:
1. Manufacturing: Speed reducer gearboxes are crucial in manufacturing processes such as conveyor systems, material handling equipment, packaging machinery, and assembly lines, where controlled motion and torque are required.
2. Robotics and Automation: Robotic arms, automated guided vehicles (AGVs), and industrial robots rely on speed reducer gearboxes to achieve accurate and controlled movement, enabling efficient automation in industries like automotive, electronics, and logistics.
3. Agriculture: Farming equipment, such as tractors and combine harvesters, utilize speed reducer gearboxes to provide the necessary torque and power for tasks like plowing, planting, and harvesting.
4. Construction: Construction machinery such as cranes, excavators, and concrete mixers use speed reducer gearboxes to manage heavy loads and ensure controlled operation during various construction activities.
5. Mining: Mining equipment, including conveyor systems, crushers, and rock drills, require speed reducer gearboxes to handle the demanding conditions and heavy loads encountered in mining operations.
6. Material Handling: Forklifts, elevators, and warehouse equipment utilize speed reducer gearboxes to control lifting and movement of goods, ensuring safe and efficient material handling.
7. Energy and Power Generation: Wind turbines, hydroelectric generators, and solar tracking systems employ speed reducer gearboxes to convert variable input speeds into consistent rotational motion for power generation.
8. Automotive: Speed reducer gearboxes are used in automotive applications, such as differential gears, to manage torque distribution between wheels and axles, contributing to vehicle stability and traction.
9. Aerospace: Aircraft systems and components, including flight control surfaces and landing gear, utilize speed reducer gearboxes for precise and controlled movement during flight and ground operations.
10. Marine: Marine propulsion systems, ship steering mechanisms, and winches rely on speed reducer gearboxes to provide the necessary power and control for marine vessels.
11. Food and Beverage: Processing equipment in the food and beverage industry, such as mixers, extruders, and conveyor systems, use speed reducer gearboxes to maintain consistent and controlled processing conditions.
These are just a few examples of the diverse industries and machinery that benefit from the use of speed reducer gearboxes. The adaptability, precision, and efficiency of speed reducer gearboxes make them essential components in various applications across different sectors.
editor by CX 2024-03-26